Configuration and Setup

After installation, the WARP1 Charger is configured via its web interface. Help for the first steps (establishing a connection and opening the web interface) can be found under First Steps. The Basic variant does not have a web interface.

The following settings are available in the firmware of the WARP1 Charger:

• Status
• Charger
  • Settings
  • Charging Status
  • Charge Tracker
  • Automation
• Energy Management
  • Energy Meters
  • Battery Control
  • Chargers
  • PV Excess Charging
  • Load Management
• Network
  • Settings
  • WiFi Connection
  • WiFi Access Point
  • WireGuard
• Interfaces
  • MQTT
  • Modbus/TCP
  • OCPP
• Users
  • User Management
• System
  • Settings
  • TLS Certificates
  • Remote Access
  • System Time
  • Event Log
  • Firmware Update